Rasorium
← Back to Rasorium

PUBLIC CALCULATOR

Know your straight razor's
bevel angle.

Enter the measurements and tape. Get the approximate bevel angle.

No account. Measurements are not saved.

How to take the measurements

Measure at the centre of the blade, avoiding the heel and point. Take both measurements in millimetres.

Calliper measuring from the edge to the spine contact point of a straight razor
L is not the razor’s full width. It is the distance from the edge to the point of the spine that touches the stone when the razor lies flat on it. See the photo above.
Calliper measuring the width of a straight razor spine
Measure the width of the spine on the metal, without tape.

Formula used

E = spine + (2 × tape thickness × layers)
α = 2 × arctan(E ÷ (2 × L)) × 180 ÷ π

Razor Bevel Angle Calculator

mm / °
mm

mm

Bevel angle—

Complete the measurements to get the result.

The result is a guide. Technique and the materials used are essential to good sharpening.